Filter
Top Products
Heat & Glo • PIER/ST/L&RCOR-HVB-CE • 2068-900 Rev. H • 6/0718
Framing should be constructed
of 51mm x 102mm (2” x 4”)
lumber or heavier.
Model A B C D E
PIER-HVB-CE 107 (42-1/8) 108 (42-1/2) 58 (23) 91 (35-3/4) 122 (48)
ST-HVB-CE 121 (47-5/8) 108 (42-1/2) 58 (23) 91 (35-3/4) 122 (48)
L&RCOR-HVB-CE 107 (42-1/8) 108 (42-1/2) 73 (28-3/4) 91 (35-3/4) 122 (48)
Figure 5. Framing Dimensions
NOTE: DIMENSIONS SHOWN IN CENTIMETERS AND (INCHES).
Shows center of 254mm x 305mm (10”x12”) flue framing holes for top and rear flueing.
The center of the hole is 25.4mm (one inch) above the center of the horizontal flue pipe.
PIER-HVB-CE
ST-HVB-CE L & R-COR-HVB-CE
A
C
B
D
B
C
A
A
C
B
E