Filter
Top Products
02-02 9 26678 Rev H
GBI25 SERIES B-VENT GAS FIRED FIREPLACE INSERT
7) DO NOT PACK INSULATION INSIDE THE
SURROUND.
8) Remove the switch from wire assembly and
feed wire through the brass trim. See
Figure15. Re-install the switch to the wires
and push into place. See Figure 16.
WARNING!
ELECTRICAL GROUNDING INSTRUCTIONS
This appliance is equipped with a three-prong
(grounding) plug for your protection against shock
hazard and should be plugged directly into a prop-
erly grounded three-prong receptacle. Do not cut or
remove the grounding prong from this plug.
Figure 11 - Installation of Hood
Figure 12 - Assemble Brass Trim
Figure 13 - Installation of Surround Hood
Figure 14 - Installation of Surround Hood
Figure 15 - Installation of ON/OFF Switch
Figure 16 - ON/OFF Switch in Surround Installed
Important: Remove all shipping material, fingerprints
and smudges from the brass trim prior to burning the
appliance. If this is not done, they will be burned into
the trim.