Filter
Top Products
Heatilator • Novus NDV Series • 4055-187 Rev. V • 1/12 57
N. Install Hood
• Locate the four screws just inside the upper section of
the appliance.
• Slide the hood into position uncer the screw heads.
• Tighten the four screws. See Figure 15.10.
M. Unpackage the Hood & Floor Cover
Remove parts package from appliance as shown in Fig-
ure 5.9.
Figure 15.9 Removing Parts Package
Figure 15.10 Intalling Hood
O. Install Floor Cover
Install the fl oor cover as shown in Figure 15.11.
Figure 15.11 Installing Floor Cover
Note: The fl oor cover in the bottom front of the fi replace may
be covering the UL labels.
It is loose and can be removed/
replaced.
L. Remove Screen Protector
• Cut the tape on top of the screen protector. See Figure
15.7.
• Open the screen protector and remove the screen. See
Figure 15.8.
Figure 15.8 Remove Screen Protector
Figure 15.7 Cut Packaging Tape