Filter
Top Products
Page 4
September 1, 2008
R
7007-161H
DIMENSIONS
Hearth Extension
B
C
F
E
Insert
SideWall
Maximum Mantel Depth - 10 inches (254mm)
Trim
Mantel
A
D
Thermal Protection USA & Canada
USA CANADA
A Sidewall to Stove 14" (356mm) 14" (356mm)
B Mantel to Stove 21" (533mm) 21" (533mm)
C *Top Trim to Stove 14" (356mm) 14" (356mm)
D **Side Trim to Stove 9" (229mm) 9" (229mm)
E Hearth Extension from Glass 16" (406mm) 18" (450mm)
F
Hearth Extension from Side of Insert
9" (220mm) 9" (229mm)
Thermal protection must be 1/4 inch (6.5mm) minimum
thickness (”k" value = 0.84) or equivalent material***
ZERO CLEARANCE INSTALLATIONS USA ONLY
*Max 3/4 inch (19mm) trim depths
**Max 3-1/2 inch (89mm) trim depths
Omni Report #060-S-52-2
In Canada a full length 6 inch (152mm) S65 ue liner
required as per ULC S628.
NOTE: When installing into a masonry replace, the re-
place must be built to national and/or local codes. Do not
remove brick or mortar from masonry replace to accom-
modate insert. The permanent metal warning plate provided
must be attached to the back of the replace stating the re-
place may have been altered to accommodate the insert and
must be returned to original condition for use as a conven-
tional replace.
CLEARANCES TO COMBUSTIBLES
United States and Canada
***See Alternative Floor Protection Worksheet on
26-1/16" (681mm)
17-1/16"
(4mm)
5-5/16"
(15mm)
18-1/2" 470mm)
12-5/8"
(21mm)
C
L
6-15/16"
(160mm)
18-/4"
(476mm)
22-1/16"
(560mm)
4-1/16"
(10mm)
0.0
o
.0" (76mm)
B
A
27-5/16" (694mm)
Panel Size A B A B
Standard 44-5/8 0-1/2 11 775
50-1/2 4-1/2 128 876
Inches Millimeters
NOTE: This installation must conform with local codes. In the
absence of local codes you must comply with the
in the U.S.A. and the
nstallation Codes in Canada.
NOTE: Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specications and/or price without notice.