Filter
Top Products
Page 2 For technical questions, please call 1-800-444-3353. SKU 3914
Save This Manual
You will need the manual for the
safety warnings and precautions, assembly
instructions, operating and maintenance
procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice
number on the inside of the front cover. Keep
the manual and invoice in a safe and dry
place for future reference.
SAFETY WARNINGS AND
PRECAUTIONS
WARNING: When using tool, basic
safety precautions should always
be followed to reduce the risk of
personal injury and damage to
equipment.
Read all instructions before using this
tool!
Keep work area clean1. . Cluttered areas
invite injuries.
Observe work area conditions2. . Do
not use machines or power tools in
damp or wet locations. Don’t expose to
rain. Keep work area well lighted. Do
not use electrically powered tools in the
presence of ammable gases or liquids.
Keep children away3. . Children must
never be allowed in the work area. Do
not let them handle machines, tools, or
extension cords.
Store idle equipment4. . When not in use,
tools must be stored in a dry location to
REV 03d, 03e, 04c, 10b
SPECIFICATIONS
Machine Type Heavy duty, industrial sewing machine; high speed, single needle-lock stitch
Drive V-belt driven (size 41 replacement belt)
Action Foot pedal operation, along with a knee and manual lifting arm for presser foot.
Feed Type Link style needle feed
Sewing Directions Forward and reverse feed
Machine Dimensions 20-
3
/
4
” L x 10” H
Accessories
- 2 Screwdrivers- 3 Bobbins- Small lubricating bottle with tip- Spare needles (size 90/14)
- Power Switch
Table Stand Kit Table Stand Kit (Model 03929) not included
Stitching Speed 5,500 SPM (Strokes per minute)
Motor Type Clutch motor; 3,450 RPM, 5.8/2.9 amps, 110/220 V~, 60 Hz; single phase
Sewing Thickness up to
5
/
16
”
Overall weight 61.6 lb.
Note: Performance of this tool may vary depending on variations in local line voltage.
Extension cord usage may also affect tool performance.
Warning: Make certain that the voltage switch on the motor is set correctly for your use.
See page 6. This machine is set up for 110V usage. Rewiring of the plug and an
approriate outlet is required for 220V usage.
This Machine requires oil to be added before use - see page 6 for details.