Filter
Top Products
38
Solar Panel (FM123), (FM122)
The FM123 Solar Panel is a 10 watt solar powered battery charger for use with the all GTO/PRO DC gate op-
erator systems. Particularly suited for remote installations, each Solar Panel comes with tubular steel support,
mounting clips, wire connectors, and 8 ft. of low voltage wire (see Low Voltage Wire for additional wire). The
GTO/PRO® control board has clearly labeled terminal connections for easy installation of the Solar Panel.
Installation in some regions of the world will require multiple solar panels for adequate charging power. The
FM122 Solar Panel is a 5 watt solar powered battery charger with all the same features as (FM123).
Push Button (doorbell) Control (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16 gauge
multi-stranded, dual conductor low voltage wire (sold separately).
Pin Lock (RB975)
The pin lock can be inserted in the chain brackets of the GTO/PRO SL-1000/1200 and SL-2000/2200 to prevent
unauthorized removal of the quick release pins.
Key Chain Mini Transmitter (RB744)
The Key Chain Mini Transmitter is a miniature version of the GTO entry transmitter that comes with the SL-
1000/2000 and has the same adjustable code settings. 12 Volt battery included.
Entry Transmitter (RB741)
The GTO entry transmitter, with adjustable code settings, is standard equipment with all GTO/PRO systems.
9 Volt battery included.
Dual & Triple Button Transmitters (RB742 & RB743)
The Dual (RB742) & Triple (RB743) Button Transmitters are for remote control of multiple separate gate openers,
and/or gate opener(s) and garage door opener(s) (see Garage Door Receiver). 9 Volt battery included.
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be programmed
to use up to 25 different personal identification number (PIN) codes. Each code is face programmable with
additional security features built in. Wired installations require 16 gauge, low voltage, multi-stranded, dual
conductor, direct burial wire (sold separately). Requires 3 AA batteries (not included).
Exit Wand (FM138)
The exit wand is designed for residential and agricultural applications and is compatible with most automatic
gate openers. The wand is an electromagnetic sensor, which offers 'hands free' operation of the gate opener with
a 12 ft. radius of detection of vehicles in motion.
Wireless Entry Intercom / Keypad (FM136)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows owner
to give up to 25 programmable entry codes to family, friends or approved delivery personnel. Codes can be
permanent of temporary. Can be wireless or hard wired up to 1000 feet.
Gate Opener Light Kit with Digital Controller (FM124)
The light kit’s control board and the daylight sensor integrate the two low voltage lights with the existing gate
opener, allowing the lights to come on when the driveway gate is opened and shut off after the gate closes, at
night. Lights can be face mounted or mounted on top of the gate post
ACCESSORIES AND PARTS AVAILABLE FROM YOUR DEALER
ACCESSORIES
POW
E
R
K
e
y
p
a
d
B
a
t
t Lo
w
Gran
t
Perm
i
ssio
n
An
s
w
er
D
V
9V
A
CC
ES
S CONTR
OL
S
YS
T
E
MS
1-
80
0
-5
4
3
-
4
2
8
3
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0