Filter
Top Products
Customer ServiceInstallation Instructions Troubleshooting Tips
Operating InstructionsSafety Instructions
49
Read these instructions completely and carefully.
Quality of Flames
The combustion quality of burner flames needs to
be determined visually.
If burner flames look like (A), call for service. Normal burner
flames should look like (B) or (C), depending on the type of gas
you use.
With LP gas, some yellow tipping on outer cones is
normal.
(C) Soft blue
flames—Normal for
natural gas
(B) Yellow tips on
outer cones—
Normal for LP gas
(A) Yellow flames—
Call for service
Check Ignition of Oven Burner
The oven is designed to operate quietly and
automatically. To operate the oven, press the
BAKE
pad and then press the number pads until
350°
appears in the display. Touch the
START
pad. After
30-90 seconds, the oven burner will ignite and burn
until the set temperature is reached. The oven
burner will continue to cycle on and off as necessary
to maintain the oven at the temperature indicated
by the display.
To check ignition of the broil burner, touch the
BROIL HI/LO
pad and then the
START
pad. After
30-90 seconds, the broil burner will ignite.
Electric ignition models
require electrical power to
operate. In case of a power outage, the oven burners
on these models cannot be lit manually with a
match. Gas will not flow unless the glow bar is hot.
If the oven is in use when a power outage occurs, the
burner will shut off and cannot be re-lit until power
is restored.