Filter
Top Products
Customer ServiceInstallation Instructions Troubleshooting Tips
Operating InstructionsSafety Instructions
33
Sealed Burner Assemblies—glass cooktop models
Turn all controls
OFF
before removing the
burner parts.
The burner grates, caps, and burner heads
can be lifted off, making them easy to clean.
When one burner is turned to
LITE,
all the burners spark. Do not attempt
to disassemble or clean around any
burner while another burner is on. An
electric shock may result, which could
cause you to knock over hot cookware.
Burner Heads
The slits in the burner heads of your range must be
kept clean at all times for an even, unhampered
flame.
You should clean the surface burners
routinely, especially after bad spillovers,
which could clog these openings.
To remove burned-on food, soak the
burner heads in a solution of mild liquid
detergent and hot water for 20-30 minutes.
For more stubborn stains, use a toothbrush.
Before putting the burner head back, shake
out excess water and then dry it thoroughly
by setting it in a warm oven for 30 minutes.
Replace the burner heads and caps. Make
sure that the heads and caps are replaced in
the correct location. There are 2 large, one
medium and one small head and cap.
NOTE: Before removing the burner heads and
caps, remember their size and location. Replace
them in the same location after cleaning.
Burner Caps
Lift off when cool. Wash burner caps in hot,
soapy water and rinse with clean water. You
may scour with a plastic scouring pad to
remove burned-on food particles.
Dry them in a warm oven or with a cloth—
don’t reassemble them wet. Replace the
burner caps.
Make sure that caps are replaced on the
correct size burner. There are 2 large, one
medium and one small head and cap.
CAUTION: Do not operate the
burner without all burner parts in
place.
After cleaning, make sure the
nipple in the burner head is
positioned toward the electrode.
Rotate the burner head around the
burner base until it is level and
securely seated.
Grate
Electrode
Small
Medium
Large
Burner head
Burner cap
Electrode
Burner base