Customer ServiceInstallation Instructions Troubleshooting Tips
Operating InstructionsSafety Instructions
13
Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after
a power failure.
12 Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn
OFF
this feature, follow
the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
DELAY START
pad. The
display will show
12 shdn
(12 hour
shut-off). Touch the
DELAY START
pad again and the display will show
no shdn
(no shut-off).
Touch the
START
pad to activate the
no shut-off and leave the control
set in this special features mode.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Celsius selections.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
BROIL HI/LO
pad. The
display will show
F
(Fahrenheit).
Touch the
BROIL HI/LO
pad again.
The display will show
C
(Celsius).
Touch the
START
pad.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is touched. This continual 6
second beep may be canceled.
To cancel the 6 second beep:
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
KITCHEN TIMER ON/OFF
pad. The display shows
CON BEEP
(continual beep). Touch the
KITCHEN TIMER ON/OFF
pad
again. The display shows
BEEP.
(This cancels the one beep
every 6 seconds.)
Touch the
START
pad.