Filter
Top Products
Installation of the range (cont.).
Electrical Connections
Usage Situations where Appliance
Power Cord will be Disconnected
Frequently.
Do not use an adapter plug in these situations
because disconnecting of the power cord places
undue strain on the adapter and leads to eventual
failure of the adapter ground terminal. The
customer should have the two-prong wall receptacle
replaced with a three-prong (grounding) receptacle
by a qualified electrician before using the appliance.
The installation of appliances designed for
mobile home installation must conform with the
Manufactured Home Construction and Safety
Standard, Title 24 CFR, Part 3280 (formerly the
Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD, Part 280) or, when such
standard is not applicable, the Standard for
Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-
Ups), ANSI A225.1, latest edition, or with local
codes. In Canada, mobile home installation must be
in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation Code.
Electric Disconnect
■ Locate disconnect plug on the range back.
■ Pinch sides of connector and pull out of range
back.
Seal the Openings
Seal any openings in the wall behind the range and
in the floor under the range when hookups are
completed.
Check Ignition of Surface Burners
Operation of all cooktop and oven burners should
be checked after the range and gas supply lines have
been carefully checked for leaks.
Electric Ignition Models
Select a top burner knob and simultaneously push
in and turn to
LITE
position. You will hear a
clicking
sound indicating proper operation of the spark
module. Once the air has been purged from the
supply lines, burners should light within 4 seconds.
After burner lights, rotate knob out of the
LITE
position. Try each burner in succession until all
burners have been checked.
Operating Instructions
48
Safety InstructionsInstallation InstructionsTroubleshooting TipsCustomer Service