Filter
Top Products
SmartCommand Thermostat
Installation Manual
16
Thermostat information screen
The Thermostat information screen (Figure 12) displays the current configuration of the thermostat wall
display unit and the HVAC control unit. This information is useful for quick check of firmware versions and
HVAC system setup. It also shows the network address setting
Thermostat information displayed includes:
Wall display unit. Model and firmware version number.
Control unit. Model and firmware version number.
System type setting. Standard or Heat Pump (HP) HVAC system.
Fan type setting (for standard systems). No fan with heat (gas systems) or fan with heat (electric
systems).
Changeover setting (for heat pump systems). Changeover with cool or changeover with heat.
Note: You will see a Fan type setting for standard systems or a Changeover setting for HP systems.
Network address setting. RS485 network address, 1 to 254 (default 1).
Figure 12. Thermostat information screen
Thermostat information screen has one navigation button, the Done button. Press Done to return to User
settings screen on page 12.
Thermostat Info
Done
TS40R Ver: 3.07.6P
HFRP Ver: 03.05.2
System Type: Standard
Fan Type: No Fan w/HT
Network Address: 1
Done