Filter
Top Products
9
Schedule setup screen
The Schedule setup screen allows you to review and set the setback schedule for the thermostat. The thermostat
has a 4 by 7 schedule. Four times a day can be selected for heating and cooling setpoints. Each day of the week
can have a different schedule. Groups of days can be copied with the same schedule. When the thermostat is set
to run mode, the schedule will be executed daily, with the setpoints being changed as per that day’s schedule
stored in the thermostat. Hold mode stops the scheduled operation and holds the current setpoints until changed
manually or by network commands.
The Schedule setup screen (Figure 5) gives you the option of setting a custom setback schedule or the option to
load one of two preset schedules.
Figure 5. Schedule setup screen
Screen options include:
Heat and cool. Change the individual day/hour and setpoints for the heating and cooling schedule (see
Heat and cool schedule screen on page 10).
Preset: Comfort. Load the comfort schedule into the thermostat. This is a preset schedule with mild
setbacks.
Preset: EnergyMiser. Load the EnergyMiser schedule into the thermostat. This is a preset schedule with
deeper setbacks.
Screen navigation buttons include:
Done. Return to Main menu screen on page 7.
Select. Select the schedule to view or modify.
Up. Move selection pointer up.
Down. Move selection pointer down.
Select Schedule
Done
Select
Heat and Cool
Preset: Comfort
Preset: EnergyMiser
Done
Select
Up
Down