Filter
Top Products
Web Browser Operation
Model 4800 User's Manual
Trigger Alarm Output: Check to display Output 1 checkbox.
Trigger Record: Choose which channels will start recording after an alarm is
initiated (options: Channels 1 to 4, All, or None).
Joint Channel: Check the box to activate a PTZ camera* (if a channel is
connected to a PTZ camera) upon alarm (options: All Channels or Channels 1 to
4).
Preset Point: Check the box to move associated PTZ camera* to Preset Point,
using a dropdown menu with preset points.
Copy To: Dropdown menu (options: All Alarm Input, and Alarm Input 1
through 4). Press COPY to copy settings from current alarm to All or a specified
alarm input.
Click CONFIRM to save changes and exit. Click CANCEL to exit without saving changes.
Click RESTORE DEFAULT to reset values to parameters before changes were made.
Click SAVE PARAMETERS to save change. Click EXIT to close the window without
saving changes.
U
SER
Click the USER tab to open the User menu to adjust user account and authority settings.
* Cameras supplied with 4800 system are not equipped with PTZ feature.