Filter
Top Products
Getting Started
Model 4800 User's Manual
16
VIDEO PLAYBACK
To playback a recorded video, click the Record Search icon on the Tool Bar.
Use the Video Playback menu to select the date/time and channel you wish to view. See
Chapter 5, DVR Settings for descriptions of the playback settings.
To playback a certain video feed from a particular camera, indicate the time and camera
from which you want to receive information. If using the remote, navigate between fields
using the
buttons and modify the time using the ▲and ▼buttons. Press ENTER to
confirm your selection.
Using the mouse, position the cursor over the field and use the navigation buttons to
modify the values. After selecting the day, click SEARCH to locate the recordings from
that day.
Select the Start and Stop time on the time line positioned against the available channels
(choose the channel to view by selecting the checkbox next to each channel). Up to four
channels can be selected for playback. The start and stop times of the recording are
indicated by two vertical lines on the time line. If using the remote control, go to the
desired line using navigation buttons. To fine-tune the required time, use the
buttons to zoom in/out of the time line or use the
buttons to move along the time line.
Time values will display above the time line.
Using the mouse, left-click once to set up the start time, then left-click to indicate the stop
time. Right-click to cancel the marked time.