Filter
Top Products
DVR Settings
Model 4800 User's Manual
CAMERA CHANNEL
Select the camera (channel) number and click the arrow buttons to select channel 1, 2, 3, 4,
or All.
PTZ PROTOCOL*
Select the PTZ device protocol, and make sure it is consistent with the protocol of the
installed PTZ cameras (options include: Pelco-D, Pelco-P, Panasonic, Philips, Samsung,
Tiandy, et.al.). The changes take effect when you save and exit the menu.
Note: Before changing PTZ protocols, select the correct channel (camera) number
in the Camera Channel field.
PTZ BAUD RATE*
Select the PTZ device baud rate and make sure it is consistent with the baud rate of the
installed PTZ cameras (options: 1200, 2400, 4800, or 9600 bps). The changes take effect
when you save and exit the menu.
PTZ ID*
Select the PTZ device ID, and make sure it is consistent with the ID of the installed PTZ
cameras. Choose a number from 0 to 255. Press the arrow buttons to select a value. The
changes take effect when you save and exit the menu.
COLOR SETTING
Adjust camera color attributes (brightness, contrast, hue, and saturation) for the best image
rendition. By default, the values are set at 8 (average value). Make adjustments depending
on the conditions at the location where the camera is installed.
Press the >> button to display a full-screen image of the camera feed, with the four color
characteristics listed.
* Cameras supplied with 4800 system are not equipped with PTZ feature.