Filter
Top Products
29
Secondary Installation
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.
Place the log set into the rebox.
Locate each log by seating it down
onto the burner tray support pins.
Follow Figures 31 to 34 proper log
placement.
Upon the rst light up, watch for
ignition to ALL burner ports. If a
long delay is noted: First, wait for the
appliance to cool down.
• Open the front door of the
appliance.
• Check to carefully reposition the
embers making sure that burner
ports are not plugged solid or
blocked.
See MAINTENANCE AND SERVICE on how to
remove door to clean glass.
Figure 34: Log Placement with Embers.
Figure 35: Appliance Burning.
Ledge for Right Log
Pin for Right Log
Figure 33: Step 4 of Log Placement.