Filter
Top Products
EMULEX MODEL 355 SAN STORAGE SWITCH
USER’S GUIDE CHAPTER 3: SWITCH MANAGEMENT
EMULEX CORPORATION 45
P
ART NUMBER 00041407-002 REV. B
MONITORING THE SWITCH
The Emulex Model 355 SAN Storage Switch provides several options for monitoring the switch status
and port information. This section describes how to view switch status, the event log, port information
and utilization, and port diagnostics.
Viewing Switch Status
The Web Manager’s home page is the Switch Information page. This page is displayed first when the
Web Manager is opened and shows general switch information, including switch status, fan and power
supply operational indicators, and port health and utilization.
This page continually refreshes to guarantee that the most current switch status is displayed. To return
to this page at any time, click the Storage Switch menu item.
Switch Information
Current status is provided for the following items.
Item Status Indicators
Switch Status • OK (green)–the switch unit is operating normally.
• Fault (red)–one or more of the ports has failed, the internal temperature
has exceeded acceptable levels, or another error has occurred. Errors
appear in the event log. The switch will continue to operate; however,
functionality may be impaired depending on the event that triggered the
error. Regardless of the cause, the switch requires immediate attention.
SOC Status • OK (green)–the switch chipset is operating normally.
• Fault (red)–the switch chipset’s selftest has failed.
Enclosure Temperature • OK (green)–the switch temperature is within the normal operating
range.
• OverTemp (red)–the enclosure temperature has exceeded the
recommended operating range.
Fan • OK (green)–the fan unit is working properly.
• Fault (red)–the fan unit has stopped operating.
Figure 3-26: Switch Information page