Filter
Top Products
View Status Options
19
5.0 VIEW STATUS OPTIONS
The View Status menu allows any user to view the status of cables in both zones, an alarm history log
and a trend log for both zones. The arrows
↑↓ are used to scroll through the menu. The Enter ↵ key is
used to select the menu item.
This section presents step-by-step instructions for each of the following options:
•View Cable Status
• View Alarm History
• View Zone Trend
Figure 15 shows the main options available from the View Status menu.
Figure 15 Menu overview - View Status menu
Opening Screen
LIQUI-TECT PANEL
DD-MON-YY HR:MM:SS
VERSION X.X.X
PRESS
↵=STATUS/SETUP
Main Menu
> VIEW STATUS
SYSTEM AND CONTROL
↑↓=NEXT
↵=SELECT
View Status
VIEW CABLE STATUS
VIEW ALARM HISTORY
VIEW ZONE TREND
↑↓=NEXT
↵=SELECT
View Cable Status
STATUS ZN1 ZONE 1
NORMAL
↑↓=NEXT
See
Section
5.1
STATUS ZN1 ZONE 1
LENGTH: 1000FT
CURRENT: 0UA
↑↓=NEXT
↵=DONE
STATUS ZN2 ZONE 2
NORMAL
↑↓=NEXT
STATUS ZN2 ZONE 2
LENGTH: 3500FT
CURRENT: 0UA
↑↓=NEXT
↵=DONE
View Zone Trend
> ZONE TREND 288/288
ZONE 1 0 UA
ZONE 2 0 UA
29-AUG-03 12:04:00
See
Section
5.3
View Alarm History
> ALARM RECORD 100/100
ZONE 1
CABLE OK
29-AUG-03 12:04:00
See
Section
5.2
ZONE 1
ALARM SILENCED - LCD
29-AUG-03 12:00:00
ZONE 1
LEAK @ 2007ft
29-AUG-03 11:48:03
ZONE 1
H/W RESET
29-AUG-03 10:32:22
ZONE 2
CABLE BREAK
29-AUG-03 09:08:07
ZONE 1
LOSS OF POWER
29-AUG-03 07:15:41
View Status options