www.elationlighting.com!
W!!!!!!!!!!!!!!!!!!!!!!!!!"#$%&"'()*'+,-.'/01203'!45
GENERAL GUIDELINES
• NEVER OPEN THIS FIXTURE WHILE IN USE!
• During the initial operation of this fixture, a light smoke or smell may emit from the
interior of the fixture. This is a normal process and is caused by excess paint in the
interior of the casing burning off from the heat associated with the lamp and will
decrease gradually over time.
• This fixture is a professional lighting effect designed for use on stage, in nightclubs,
theatres, etc. Do not attempt installation and/or operation without proper knowledge
of how to do so.
• Do not permit operation by persons who are not qualified for operating this type of
theatrical fixture. Most damages are the result of operations by nonprofessionals.
• If this fixture is exposed to extreme temperatures due to environmental changes, do
not power the fixture on until it has reached room temperature. Condensation could
damage the fixture.
• Consistent operational breaks may ensure the fixture will function properly for many
years to come.
• Do not shake fixture, avoid brute force when installing and/or operating the device.
• When choosing an installation location, please be sure this fixture will not be exposed
to extreme heat, moisture, and/or dust. The minimum distance between this fixture
and other devices or wall and/or flat surface should be at least 0.5 meter (1.5 ft).
• When using quick release “OMEGA” Cam-Lock system, be sure the four quick lock
fasteners are locked in the quick lock holes correctly.
• Always install the fixture with an appropriate safety cable. When installing the fixture
in a suspended environment, always use mounting hardware that is no less than M10
x 25 mm, also be sure the hardware is insert in the pre-arranged screw holes in the
base of the fixture.
• Please use the original packaging and materials to transport the fixture in for service.