Filter
Top Products
www.elationlighting.com!
ST!!!!!!!!!!!!!!!!!!!!!!!!!"#$%&"'()*'+,-.'/01203'!45
USER MODE SETTING
Select different channels list by different sequence.
For example, after the user enter this manual, if select Auto Program = CH 22, means
in this User’s mode, the “Dimmer” is in Channel 16.
USER MODE SETTING – User Mode
Create user defined channel orders, the default is Stand Mode.
1. Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until
“User Mode Set” is highlighted and tap ENTER.
2. Tap UP/DOWN until “User Mode” is displayed and tap ENTER.
3. Tap UP/DOWN to select desired mode (“Stand Mode”, “Basic Mode”, “Extend
Mode”, “User Mode A”, “User Mode B”, “User Mode C”) and tap ENTER to
confirm selection.
4. Tap MODE/ESC to return to the main menu.
USER MODE SETTING – Edit User Mode (A, B, C)
Adjust the rest user defined channel order.
1. Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until
“User Mode Set” is highlighted and tap ENTER.
2. Tap UP/DOWN to select desired user (“Edit User Mode A”, “Edit User Mode B”,
“Edit User Mode C”) is displayed and tap ENTER.
3. Tap UP/DOWN to select desired mode (“Max Channel”, “Auto Program”,
“PAN”, “PAN-Fine”, “TILT”, “TILT-Fine”, “Move Speed”, “Strobe”, “Dimmer”,
“Red(1-4)”, “Green(1-4)”, “Blue(1-4)”, “White(1-4)”, “Color Macro”, “Color
Preset”, “Color Mode”, “Color Patter”, “Chase Speed”) and tap ENTER to
confirm selection.
4. Tap UP/DOWN to select desired channel (“None”, “01Ch-17Ch”) and tap ENTER
to confirm selection.
5. Tap MODE/ESC to return to the main menu.