Filter
Top Products
www.elationlighting.com!
5S!!!!!!!!!!!!!!!!!!!!!!!!!"#$%&"'()*'+,-.'/01203'!45
SECURING
• Secure the clamp to the bracket using a M12 screw fitted through the Ф13 center hole.
• Insert the ¼ Turn Twist Locks of the first Omega bracket into the respective holes on the
bottom of the device. Tighten the Twist Locks a ¼ turn clockwise.
• Install the second Omega bracket on the top of the device in the same way.
• Pull a safety cable through the holes on the bottom of the base and over the trussing
system or a safe installation.
Notice: This step is very important to ensure the fixture will not drop out by the
damage of the clamp.