Elation Professional Rayzor Q7 Indoor Furnishings User Manual


 
www.elationlighting.com!
5Y!!!!!!!!!!!!!!!!!!!!!!!!!"#$%&"'()*'+,-.'/01203'!45
1. LED Assembly – RGBW Quad LEDs comprise the LED assembly.
2. DC Switch – Controls menu and display power when disconnected from main power.
3. Microphone Captures external low frequency sounds to trigger the unit in Sound
Active mode. Designed to capture low frequency sounds only, tapping on the
microphone and/or high-pitched sounds may not trigger unit.
4. LCD Menu Control Display Full color LCD animated menu display.
5. MODE/ESC Button – Used to access the menu functions and exit the current command.
6. ENTER Button – Used to enter into or lock a certain menu function.
7. LEFT Button – Used to toggle through the menu display.
8. DOWN Button – Used to toggle down or back through the menu functions and settings.
9. UP Button – Used to toggle forward through the menu functions and settings.
10. RIGHT Button – Used to toggle through the menu display.
11. 5-Pin DMX IN – Accepts incoming DMX signal via a male 5-pin XLR jack.
12. 5-Pin DMX OUTSends incoming DMX signal to the next fixture in the DMX chain via a
female 5-pin XLR jack.
13. Power Switch – Used to power the unit ON or OFF.
14. Fuse Holder Assembly – Houses 250v T3.13A GMA safety fuse. Always replace with
an exact match unless otherwise specified by an authorized Elation Service Technician.
Using a fuse other than that specified could seriously damage the unit and may void the
manufactures warranty.
15. Power IN – Power connection (powerCon) to power source
16. Power OUT – Power connection (powerCon) to daisy chain to another unit.