Filter
Top Products
SCS-1R Installation Guide Digital Monitoring Products
23
opeRatoR’s GuIde
Set System Time/Date
This selection allows you to set the correct time and date on the SCS-1R. All changes made in this selection print
to the Activity Log printer. The time entered here is sent to panels if the Time Change programming option is set
to YES.
SCS-1R MENU
TIME/DATE
Time/Date
Press any top row Select key to display the time and date. Press the COMMAND key to
advance to the next section of programming.
TUE 12:05 PM
04/07/09
Current Time/Day/Date
Press the COMMAND key to program the time and/or date. Press the Back Arrow key to
return to the previous display.
SET TIME/DATE
TIME DATE
Set Time/Date
Press the top row Select key under the item you would like to change. For example,
press the far left Select key to change the SCS-1R time.
ENTER TIME:
- : AM PM
Time
Press any top row Select key to enter the new time. Using the Digit keys on the
keypad, enter the current time and then press Select key under AM or PM. TIME
CHANGED displays after the time has been changed.
ENTER DATE:
- / /
Date
Press any top row Select key to enter the date. Enter the month, date, and year in the
following format: MM/DD/YY, with leading zeroes. Press COMMAND to accept the date
and display the following prompt.
TIME CHANGED
Time/Date Changed
If the Time or Date has been changed successfully, the display will show TIME/DATE
CHANGED.
Exit Programming Menu
Exit Menu allows you to properly end programming and exit the menu.
SCS-1R MENU
STOP
Exit Menu
Press any top row Select key to exit the SCS-1R menu.