Filter
Top Products
37
3.3.7 CALLBACK (only for the VEGA WIRELESS CAMERA GPRS)
In this window you may associate a function of the Vega Wireless Camera GPRS to a phone call. After
selecting the phone call association option according to your needs, you may call the phone number of the
SIM card in the Vega Wireless Camera GPRS from your mobile phone, as if you were calling an ordinary
mobile phone number.
When you get a phone call, the camera detects the incoming phone number by comparing it to the phone
numbers inserted in the Cli Enabled configuration window. If the user is enabled, the Vega Wireless Camera
GPRS performs the enabled function.
Specifically, the camera will deny the phone call without answering and with no costs: in such cases you will
normally see a busy line message on your mobile’s display. The camera will then send a SMS message or
call you in order to confirm the performing of the requested operation.
CallBack: in this field you define the function you wish to associate to a phone call.
Disabled
No function associated to a phone call.
Alarm Simulation
The phone call is associated to an alarm simulation.
Each time you wish to save the images according to the Frame before and
Frame after settings inserted during the configuration process, you will only
need to call the Vega Wireless Camera GPRS phone number from your
mobile phone. The camera reads the incoming phone number and compares
it to the phone numbers in the Cli Enabled configuration page. If the user is
enabled, then Vega Wireless Camera denies the call and immediately
manages an alarm event, as if the alarm had been detected on one of the
digital inputs.