Filter
Top Products
31
3.3.4 CAMERA
In this window you may change the parameters of the image capture.
Fps (Frame per second): it is the frame rate of the camera. It supports values from 1 to 10 frames per
second.
Alarm Rate: it is the saving rate, in case of alarm detection on digital inputs. The value inserted will define
the time interval (expressed in seconds) for an image saving. The minimum value is 1 second.
Live Update: it is the image display frequency in the Live page. The value inserted will define the time
interval (expressed in seconds) for an image update in the Live page. The minimum value is 1 second.
In order to display the Live page through the GPRS page we suggest to use a value which is higher
than 5 seconds.
Brightness: to adjust image brightness. Values may vary from 0 to 100.
Contrast: to adjust image contrast. Values may vary from 0 to 100.
Color Intensity (Hue): to adjust color intensity. Values may vary from -50 to +50.
Saturation: to adjust color saturation. Values may vary from 0 to 100.
Frame Before and Frame After: define the image quantity to save before and after the alarm event
respectively. The maximum image quantity is indicated in the Max Frame table. This value will vary
each time you modify the values in the Frame Size and Resolution fields.
The setting of the Frame Before and Frame After values will allow you to increase or decrease the
alarm quantity to be handled by your camera. Check the Max Alarm value in the relevant table.