Digicom 7D1476 Home Security System User Manual


 
34
Switch Off Timeout: defines the management of the backup battery. In case of main power supply lack, the
Vega Wireless Camera keeps functioning thanks to a rechargeable backup battery.
0
Battery management is disabled. In case of main power supply lack, the camera
turns off.
1
Battery management is disabled only with next main power supply lack. This option
can be used, for example, during configuration and installation, in case you really
want to turn off the device and preserve the backup battery charge.
To turn off the camera immediately, set the Switch Off Timeout option to 1 and take
off the main power supply.
from 2 to
254 minutes
Battery management is enabled. The camera will be powered by the battery for the
fixed time. Once this time expires, the Vega Wireless Camera will turn off.
255
Battery management is enabled. The camera will be powered by the battery for the
whole operation time, which is about 40 minutes.
Factory default: allows to reset all camera configuration parameters to factory values. The same operation
is possible through the reset button.
Main Reset: this command enables to reboot the camera. The same operation is possible through the reset
button.
IP Server (tftp) and Code Update (tftp): these items can be used to update the camera firmware revision.
When new firmware updates are available, these will be published on our web site with the relevant
explanations.