www.desatech.com
111986-01D26
6. Place log #6 (left log) onto two pins on left
side of back and front log. See Figure 48.
7. Place lava rock along sides and front of rebox
bottom in areas that are visible only. It is not
necessary to use all of lava rock provided.
8. Pull ember material apart into pieces no larger
than a dime. Place these pieces loosely and
sparingly directly onto exposed section of
front burner and along space between burner
and grate prongs (see Figure 49). This will
create glowing ember appearance as ame
touches ember material. Do not block air slots
by using too much ember material in one area.
It is not necessary to use all of ember material
provided.
FIREPLACE
INSTALLATION
Continued
1
2
Figure 44 - Installing Log No. 1
Figure 45 - Installing Log No. 2
3
Figure 46 - Installing Log No. 3
5
6
Figure 48 - Installing Logs No. 5 and No. 6
4
Figure 47 - Installing Log No. 4
Ember Material
Figure 49 - Placing Ember Material on
Burner
9. Close glass door, lock door latches, replace
screen and close louvers (see Removing/Replac-
ing Glass Door, steps 5 through 7, page 24).