Desa CDVBPC Electric Heater User Manual


 
105501-01F
For more information, visit www.desatech.com
For more information, visit www.desatech.com
31
31
WIRING DIAGRAM
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper and dangerous operation. Verify proper
operation after servicing.
Figure 61 - Blower Wiring Diagram for Thermostat-Controlled
Models
Blue
Variable
Fan Switch
Fan Switch
(N.O.)
Green
White
On
110/115
V.A.C.
Blower
Motor
Black
Off
1
2
Black
SPECIFICATIONS
CDVBN(A) CDVBP(A)
16,000-22,000 Btu/hr 14,000-20,000 Btu/hr
Gas Type Natural Propane/LP
Ignition Piezo Piezo
Manifold Pressure 3.5" w.c. 10.0" w.c.
Minimum Inlet Supply Pressure 4.5" w.c. 11.0" w.c.
Thermal Efficiency 70% 70%
Dimension, Inches/mm (HxWxD)
Stove and Burner System* 26
1
/2" x 25" x 25
5
/8" 26
1
/2" x 25" x 25
5
/8"
673.1 x 635 x 650.7mm 673.1 x 635 x 650.7mm
Carton (Insert Only) 23
1
/4" x 33
1
/4" x 23
1
/2" 23
1
/4" x 33
1
/4" x 23
1
/2"
590.5 x 844.5 x 596.9mm 590.5 x 844.5 x 596.9mm
Weight, lbs/kg
Burner System 70 lbs/31.8 kg 70 lbs/31.8 kg
Shipping 75 lbs/34 kg 75 lbs/34 kg
* When installed in Comfort Glow cast iron stove body (CISGA Series and CISCA Series).
REPLACEMENT PARTS
Note:
Use only original replacement parts. This will protect your
warranty coverage for parts replaced under warranty.
PARTS UNDER WARRANTY
Contact authorized dealers of this product. If they can not supply
original replacement part(s), call DESA International’s Technical
Service Department at 1-866-672-6040.
When calling DESA International, have ready
your name
your address
model and serial numbers of your burner system and stove
how burner system or stove was malfunctioning
type of gas used (propane/LP or natural gas)
purchase date
Usually, we will ask you to return the part to the factory.
PARTS NOT UNDER WARRANTY
Contact authorized dealers of this product. If they can not
supply original replacement part(s), call DESA International at
1-866-672-6040 for referral information.
When calling DESA International, have ready
model number of your burner system and stove
the replacement part number
WIRING DIAGRAM
SPECIFICATIONS
REPLACEMENT PARTS