Filter
Top Products
20
041A5735C
041A0079
204C0240-2
041D0577
108C0082
041A5908
041A5797
158A0049
031D0587
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons
in order to avoid hazard.
REPLACEMENT PARTS
34
CARE OF YOUR OPENER
When properly installed your opener will operate with minimal maintenance. The opener does not require
additional lubrication.
Limit and Force Adjustments: These adjustments must be checked and properly set when opener is
installed. Weather conditions may cause some minor changes in the door operation, requiring some re-
adjustments, particularly during the first year of operation.
Refer to the limit and force adjustments in sections 22 & 23. Follow the instructions carefully and repeat the
safety reverse test after any adjustment.
Transmitter:The portable transmitter may be secured to a car sun visor with the clip provided. Additional
remotes can be purchased at any time for use in all vehicles using garage. Refer to Accessories. Any new
remotes must be programmed into the opener.
Transmitter Battery: If transmission range decreases replace the battery.
To Change Battery: To replace batteries, use the visor clip or screwdriver blade to pry open the case. Insert
batteries positive side up. To replace cover, snap shut along both sides. Do not dispose of the old battery with
household waste.
MAINTENANCE OF YOUR OPENER
Once a Month:
• Repeat safety reverse test. Make any necessary adjustments.
• Manually operate door. If it is unbalanced or binding, call for professional garage door service.
• Check to be sure door opens and closes fully. Adjust Limits and/or Force if necessary.
Once a Year:
Oil door rollers, bearings and hinges. Do not grease the door tracks.
Clean and lubricate the pole, chain and trolley. The opener does not require additional lubrication.