Casio QV-11 Plumbing Product User Manual


 
17
Connecting the Wrist Strap
Pass the wrist strap through the hole on
the side of the camera a shown in the
illustration.
Using the Cleaning Cloth
Use the cleaning cloth to wipe finger-
prints and smudges from the LCD and
lens.
• Be sure to avoid applying too much
pressure when wiping the LCD. Too
much pressure can cause permanent
discoloration, abnormal images, and
cracks.
Using the Soft Case
Keep the camera in its soft case to pro-
tect it when not in use.
22
22
2
11
11
1
General Guide Getting Acquainted
18
Operation Reference
To record an image
Be sure to load batteries (page 25) before operation.
2
3
1
5
1. Set to REC.
2. Slide to the right to turn on power.
3. Set to NORMAL.
Set to MACRO for close-ups. See page 40 for information on
the difference between NORMAL and MACRO.
4. While viewing the image on the LCD, slowly move the cam-
era so the image appears as you want it.
5. Press the shutter button.
The message “WAIT” appears on the LCD for about four
seconds along with the image that was recorded when you
pressed the shutter button. You can use the camera to take
the next picture after the “WAIT” message disappears.
The camera can hold up to 96 images in memory
4
19
Operation Reference
To view images stored in memory
You can recall images and view them on the LCD.
1. Set to PLAY.
2. Slide to the right to turn on power.
An image appears on the LCD when power comes on.
3. Press [+] to display the next memory page or [–] to display
the previous page.
3
2
(2)
1
Getting Acquainted
20
To delete images stored in memory
After you delete an image you can store a new one it its place.
4
2, 6
5
3
1. Display the image you want to delete (page 19).
2. Press DEL.
The following steps are performed in accordance with
prompts that appear on the LCD.
3. Press [+].
4. A message appears to confirm that you really want to de-
lete the image.
To abort the delete operation without deleting anything,
press DEL here.
5. Press the shutter button to delete the image shown on the
LCD.
6. After you finish deleting all the images you want, press
DEL to quit the delete procedure.