Filter
Top Products
22
START--UP CHECKLIST
(REMOVE AND STORE IN JOB FILE)
I. PRELIMINARY INFORMATION
Model No ............................................................................................................................................................
Serial No .............................................................................................................................................................
Date .....................................................................................................................................................................
Technician ..........................................................................................................................................................
Customer Information(Name/Address) .....................................................................................................................
II. PRE--START--UP
____ Verify that all packing materials have been removed from unit.
____ Verify that condensate connection is installed per installation instructions.
____ Check all electrical connections and terminals for tightness.
____ Check wire proximity to refrigerant tubes and sheet metal edges.
____ Check that indoor (indoor) air filter is clean and in place.
____ Verify that unit installation is level.
____ Check fan wheel propeller for location in housing and setscrew tightness.
III. ST ART--UP
Supply Voltage: L1 --L2 __________ L2--L3 __________ L3-- L1 __________
Compressor Amps: L1(C) __________ L2(S) __________ L3(R) __________
Indoor Fan Amps: __________ Outdoor Fan Amps: __________
TEMPERATURE--Co oling Mode
Outdoor Air Temperature: __________ DB ____________WB
Return --Air Temperature: __________ DB __________ WB
Cooling Supply Air: __________DB___________WB
PRESSURES--Cooling Mode
Refrigerant Suction __________ psig
Suction Line Temp* ___________
Refrigerant Discharge __________ psig
Discharge Temp{__________
TEMPERATURE--Heating Mode
Outdoor Air Temperature: __________ DB ____________WB
Return --Air Temperature: __________ DB __________ WB
Cooling Supply Air: __________DB___________WB
PRESSURES --Heating Mode
Refrigerant Suction __________ psig
Suction Line Temp* ___________
Refrigerant Discharge __________ psig
Discharge Temp{__________
____ Verify Refrigerant charge using charging tables
*Measured at suction inlet to compressor
{Measured at liquid line leaving outdoor coil
Manufacturer reserves theright todiscontinue, or change at anytime, specifications or designs withoutnotice andwithout incurring obligations.
E2008 BryantHeating& CoolingSystemsD 7310 W.MorrisSt.D Indianapolis,IN 46231 Printedin U.S.A. Edition Date:08/ 08
Replaces:II664B---24---3
Catalog No. II664B---04
664B