Filter
Top Products
MODEL
5200
OWNERS MANUAL
Premier Series
7-Day Programmable
2-Heat/2-Cool & Heat Pump
Digital Thermostat
Compatible with low voltage multi-stage heat
pump systems with up to two stages of heating
and two stages of cooling. Not for use on
single-stage heating or cooling systems.
READ ALL INSTRUCTIONS BEFORE PROCEEDING
© 2004 Braeburn Systems LLC All Rights Reserved. Pub. No. 5200-100-002
Store this
booklet for
future reference
Braeburn Systems LLC, as an Energy Star partner
has determined that this product meets the Energy
Star Guidelines developed by the U.S. Environmental
Protection Agency & the U.S.Department of Energy
for maximum energy efficiency.
WARRANTY
YEAR
LIMITED
CONTENTS
WARNING!
Quick Reference/Installation Guide
Important Safety Information
• Always turn off powerto the air conditioningor heating systemprior to installing,
removing,cleaning or servicing thermostat.
• Read thismanual thoroughly prior toinstalling, programming oropera ting this
thermostat.
• This thermostat is designedfor use with a24 VoltAC low voltage multi-stage heat
pump system.
• Do notuse this thermostat on single stagesystems or other systemswith
voltages higherthan 30VoltAC.
• This thermostat requires 24VoltAC power fornormal operation andcontrol of the
heating orcooling system.
• This thermostat also requirestwo (2) properly installed"AA" alkaline batteries to
retain usersettings and programs inthe event of lossof AC Power due topower
outage orrolling blackouts.
• Wiring mustconform to all buildingcodes and ordinances asrequired by local
and nationalcode authorities having jurisdiction.
• Do notshort (or jumper) acrossterminals on the gasvalve or atthe heating or
cooling systemcontrol board to testthe thermostat installation. This could
damage thethermostatand voidthe warranty.
• Do notselect COOL mode ofoperation ifthe outside temperature isbelow50˚ F
(10˚ C). This could possiblydamage the controlledcooling system and maycause
personal injury.
• This thermostat should onlybe used as describedin this manual. Any other use
is notrecommended and will voidthe warranty.
1
FEATURES
SPECIFICATIONS
INSTALLATION
Replacing Existing Thermostat
Installing Your New Thermostat
TESTING YOUR NEW THERMOSTAT
PROGRAMMING
Default T hermostat Settings
Setting Current Time of Day and Day of Week
Setting Temperature Di fferential and Residual
Cooling Fan Feature
Setting First Stage Differential
Setting Second Stage Differential
Setting Residual Cooling Fan Feature
Setting Your Energy Sa ving Programs
Tips Before Starting
Using Quick Program Groups
or Individual Day Programming
Entering Your Program
ADDITIONAL OPERATION FEATURES
Review Se t Temperature
Temporary Program Override
Permanent Hold (Vacation) Mode
Efficient Recovery Mode (ERM
™
)
Compressor Protection
High Temperature Safety Switch
Changing Fahrenheit (˚F) to Celsius (˚C)
Low Battery Detection and Re placement
Replacing the Back-up Batteries
Resetting Thermostat
Multi-Colored LED Indicators
TROUBLESHOOTING
WIRING DIAG RAMS
1
2
3
4
5
6
7
8
5.1
3.1
3.2
5.2
5.3
5.4
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
5.3.1
5.3.2
5.3.3
5.4.1
5.4.2
5.4.3
6.8.1