Filter
Top Products
61
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
This message is displayed if the “START/STOP” button is
pressed when pattern input for a “frame pattern” has not yet
been completed.
This message is displayed when the total number of characters
or patterns combined exceeds a maximum 35.
This message is displayed if you touch the “?????” key while
the machine is embroidering.
Instruction message displays
Audio alarms
This message is displayed during bobbin winding.
This message is displayed after a “MEMORY” space is touched
to save a pattern to that space. The power should not be turned
off while this is on the display.
This message is displayed while the machine is calculating after
you touched the “?????” key. Touch “CANCEL” if you would
like to interrupt the calculation process.
● Proper operation will sound: One beep
Improper (wrong) operation will sound: Two or four beeps