Filter
Top Products
45
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
Embroidering from a specific starting point
1. Make a mark at the starting position on the fabric in the
frame as shown in the illustration. The mark cannot be too
close to the edge of the frame as the presser foot prevents
the needle from getting very close to the frame.
2. Touch “START/CENTER” to select “START” and then touch
the arrow key to align the hole of the presser foot with the
mark.
Changing the pattern direction
ABC ABC
ABC
ABC
ABC
The pattern will be rotated clockwise in 90˚ steps as shown in
the illustration at left each time “90˚ clockwise” is touched.
ABC
3. Embroider the pattern.