Filter
Top Products
58
CONTENTS
MACHINE
KNOWLEDGE
EMBROIDERING MAINTENANCE
ERROR
MESSAGE
TROUBLESHOOTING
PATTERNS
EMBROIDERING
USING A SMALL
FRAME
(OPTIONAL)
EMBROIDERING
USING A
EXTRA-SMALL
FRAME (OPTIONAL)
EMBROIDERING
USING A LARGE
FRAME
(OPTIONAL)
CLEANING
Always keep the machine clean.
1. Turn off the power, remove the needle, and then raise the
presser foot lever.
1 Use a screwdriver to loosen the screw to remove.
2
3
2. Loosen the screws on the needle plate.
3. Remove the needle plate.
O
5
4
4. Take out the inner rotary hook.
5. Remove any accumulated lint and threads from the inner
hook and race with a brush or a small vacuum cleaner
attachment.
1 Race
2 Inner rotary hook
* Lint and dust accumulated in the race can cause poor
quality stitching.
6. Put the inner rotary hook back in position by placing the
projection of the hook next to spring of the stopper.
1 Projection of the hook
2 Spring of the stopper