Filter
Top Products
91
This message is displayed when the motor is
locked, such as when the thread becomes entan-
gled.
This message is displayed when the “START/
STOP” or “REVERSE STITCH” button is pushed,
or when the foot controller is pressed down while
the presser foot is raised.
This message is displayed when the pattern that
you tried to store could not be combined.
This message is displayed when you tried to com-
bine more than 70 patterns.
Warning messages
ERROR MESSAGES
If the machine is not properly setup when the “START/STOP” or “REVERSE STITCH” button is pushed, or a
correction of your operating procedure is necessary, the machine will not start and will instruct you with an
alarm and warning message on the LCD.
This message is displayed when the “REVERSE
STITCH” or “NEEDLE POSITION” button is pushed
while the bobbin winder shaft is at the right.
This message is displayed when the “START/
STOP” button is pushed while the foot controller is
connected.
This message is displayed when a pattern other
than a buttonhole is selected and the “START/
STOP” or “REVERSE STITCH” button is pushed
while the buttonhole lever is lowered.