Filter
Top Products
58
1. Attach presser foot “J”, then place the right sides of the fabric
together and sew straight stitches up to the area where the
zipper will be attached. Then, baste at opening (the zipper
area).
1 End of opening
2 Reverse stitch
3 Basting
4 Reverse side
2. Press the seam allowance open and align the folded hem along
the teeth of the zipper while allowing 3 mm (1/8") for the sew-
ing space.
1 Reverse side
2 Allow 3 mm (1/8") for sewing
3 Teeth of zipper
4 Slider on head of zipper
5 Crotch end (base of zipper)
3. Attach the left pin of presser foot “I” to the presser foot holder,
then sew the lower piece of fabric from the top to the bottom of
the zipper.
* Before sewing, touch the automatic reinforcement stitching
key to sew reinforcement stitches automatically at the begin-
ning and at the end of the stitch.
Side application
4
I