Filter
Top Products
BES-941BC • BES-1241BC
92
Chapter 5 Setting
Setting of Needle Bars
Needle bars allocated in the sequence of sewing can be modified.
This setting is explained on the basis of the BES-1241BC screen.
1. Press
.
2. Select a sewing sequence to modify by pressing
.
The current embroidering sequence is selected while embroidering is interrupted.
Press for modifying all sequences at one time.
3. Input the number of a needle bar by pressing ten keys.
When inputting a numerical figure exceeding 10, press the
0
SPACE
first.
Insertion of Feedhold
Press and reverse the display on the right of a point to insert a feedhold, then
press
STOP
.
4. Press
END
.
Modified setting is saved and the previous screen is displayed again.
A feedhold mark is displayed.