Filter
Top Products
BES-941BC • BES-1241BC
119
Chapter 5 Setting
2. Press the
END
button.
The changed settings are stored and the previous screen is displayed.
Feed Timing
The timing of needle drop and hoop movement can be adjusted according to the
cloth thickness.
The value can be designated between 95 and 125 degrees in 1-degree units.
The smaller values are suitable for thick material and the larger ones are suitable
for thin material. The standard value is 110 degrees.
1. Press
three times.
2. Select
with .
3. Press .
4. Designate the feed end angle with .
5. Press the
END
button.
The changed settings are stored and the previous screen is displayed.