Filter
Top Products
BES-941BC • BES-1241BC
87
Chapter 4 Editing of Embroidering Data
Thread Trimming Feed Number
3. Select this function by pressing .
4. Select the number of feeds by pressing .
5. Press
END
after setting is finished.
Swing Width Correction
Correction values within -5 ~ 20 can be input. However, excessively large values
may result in distortion of a pattern.
3. Select this function by pressing
.
4. Select a correction amount in the X direction by pressing .
5. Reverse by pressing .
6. Input a correction amount in the Y direction by pressing .