Filter
Top Products
BES-941BC • BES-1241BC
76
Chapter 3 Selection of Data and Embroidering
Writing the embroidering data
The embroidering data stored in the memory of the machine is written to the floppy disk.
The format of the data to be written is brother ESC or TAJIMA TFD.
1. Press the
button.
The embroidering data stored in the memory is displayed.
2. The list of the embroidering data is displayed. Select the screen by
pressing
.
3. Select the embroidering data to be written with numeric keys or .
4. Press the
END
button.
5. Designate the thread trimming feed number with
.
It cannot be designated when the ECS data format is selected.
Use numeric keys,
, or the
DELDEL
button to change the file name.
6. Highlight the icon of the data format with and designate the format
of the data to be written with
.
7. Highlight the edit value validating or invalidating icon with
and
designate validating or invalidating of the edit value.
8. Set the formatted floppy disk.
9. Press the
END
button.
The selected embroidering data is stored on the floppy disk.