Filter
Top Products
Chapter 6 Operation of Machine
BES-941BC • BES-1241BC
128
No.1 Stitch No.2 Stitch No.3 Stitch
1. Turn off the MENDING lamp No. 3 at the
standby position A.
(The position A should be the mending end
position.)
2. Press the jog
switch or to move it
backward.
Turn off the MENDING lamp No. 2 at the
position B.
(The position B does not become the end
position; the position A remains the end
position.)
Note) When the MENDING switch of the machine
head whose lamp is off is pressed:
• The MENDING lamp of the machine head is
lit, and mending is executed for the ma-
chine head.
Note) When the MENDING switch of the machine
head whose lamp is on is pressed:
• The MENDING lamp of the machine head
goes off and mending is not excuted for the
machine head.
No.1 Stitch No.2 Stitch No.3 Stitch
No.3
Mending LED is off.
Stand by
position A
B
Stand by
position A
Mending LED
When a thread breakage error is occurring, refer to "Setting of Mending" ( Page 100) as well in
order to correct missing stitches caused by a thread breakage.