Filter
Top Products
7-4 BE-1204B-BC • BE-1206B-BC
Chapter 7 Maintenance
2. Oiling
Supply oil to the following places at regular intervals.
• When oiling, be sure to supply Brother’s specified oil (Nippon Oil, Embroidery Lube 10N; VG10) using
the dropper.
• Excessive oiling may cause the material to be stained.
• Be sure to wipe off excessive oils with waste cloth etc.
2-1 Head
! Supply one or two drops of oil to each needle bar from the oil supply holes of the lower cover daily.
W1221Q
! Lubricate the felt on the top surface of the head once a week.
W1291Q
Felt