Filter
Top Products
BE-1204B-BC • BE-1206B-BC 5-13
Chapter 5 Setting
Setting of thread breakage error resetting method
4. Select
by pressing
.
5. Press
for modifying a resetting method.
W0507Q
For setting whether to stop embroidering temporarily at the mending stop point
4. Select
by pressing
.
5. Press
and select whether to stop embroidering temporarily.
W0508Q
Setting of thread trimming method after stopping
4. Select a thread trimming method by pressing
.
W0507Q
Setting of mending stop position
4. Select a stop point (number of stitches before mending) by pressing ten keys.
The machine does not stop if the automatic step-back setting is lower than the input value.
W0509Q
After setting all items, press .
Modified setting is saved and the initial screen is displayed again.
Modify this figure.