Filter
Top Products
25
Special Alert
I have this feature.
I do not have this feature.
This feature requires a passcode.
This command is a manually operated and initiated alarm command.
Command 9 is programmed to respond to several situations that can need
immediate attention. This command can also be used to send a silent alarm to
your security company without sounding an alarm signal on the premises. Check
with your security company for the available options.
COMMAND 9
To engage COMMAND 9:
1. Press the [COMMAND] bar. The Command mode indicator light
comes on.
2. Press the [9] key. Your COMMAND 9 special alert is programmed
to:
_____ notify your alarm company.
_____ ring a bell on your premises.
Description:
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________