Filter
Top Products
11
Turn the Entire System On Without Delays
I have this feature.
I do not have this feature.
This feature requires a passcode.
Use this function to turn on the entire system, both perimeter and interior
without delays. When entering Command 11, remember that the second [1] must
be pressed within 2 seconds of pressing the first [1].
COMMAND 1 1
Using Command 11:
1. Ensure all points are secure. All Point Status indicator lights on
the keypad should be off. If not, see the section describing Force
Arming the System (on page 29).
2. Press the [COMMAND] bar. The Command mode indicator light
comes on.
3. Press the [1] key. Now press the [1] key again.
4. The PERIMETER, INSTANT, and INTERIOR lights come on,
showing the perimeter, instant, and interior points are armed without
entry/exit delay time.
5. To disarm your security system, enter your personal passcode
and press [ENT].