Filter
Top Products
This User’s Guide has been designed to help you
get the utmost satisfaction from your BISSELL
ProHeat 2X. You’ll find assembly and operating
instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this User's Guide thoroughly before
assembling your Deep Cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this User’s Guide will greatly enhance
your ability to get the most performance from your
BISSELL ProHeat 2X for many years.
Your ProHeat 2X comes in three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to assemble your cleaner is
a Phillips head screwdriver.
Refer to Assembly Diagram on page 5
1. Slide upper handle onto lower handle.
2. Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of upper handle
and secure with tapered screw.
4. Place lower hose rack onto back of upper
handle by pushing in and sliding down until it
snaps into place.
5. Snap tools into the tool caddy as shown in
figure 5.
6. Wrap power cord and flex hose as shown in
figure 6.
7. Keep flex hose snugly in place by using
the hose secure latch.
ProHeat 2X assembly is now complete.
WARNING:
Do not plug in your
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
How to Use this Guide
1 2
3 4
6
www.bissell.com
Tough
Stain Brush
TurboBrush
(select models)
Scotchgard
Protector
Applicator Tool
(select models)
Spraying
Crevice Tool
(select models)
Crevice Tool
Holder
(select
models)
6
Hose Secure
Latch
Assembling Your ProHeat 2X
5
ug310-5880_9200E_406.indd 6ug310-5880_9200E_406.indd 6 6/9/06 4:25:36 PM6/9/06 4:25:36 PM