Filter
Top Products
2. Fill the formula tank. Fill up the formula tank
by first unscrewing the cap and insert. Always use
genuine BISSELL formulas to maximize cleaning and
for the safety of your machine. Fill formula up to the
line and replace the cap and insert. Place formula
tank into the slot in the back of the machine for a
snug fit.
3. Set Custom Clean dial. Simply choose one of the
4 settings (heavy traffic, normal clean, light clean,
or rinse) and the ProHeat 2X will adjust the right
amount of cleaning formula to mix with the heated
water to fit your cleaning need.
4. Set Ready Tools dial to the floor
cleaning setting.
5. Plug into a proper outlet and turn the power
and heater switches to the ON ( I ) position.
Allow one minute for the built-in heater to
warm-up before cleaning. The ProHeat 2X will be
fully warmed and will provide optimal performance
after one minute of continuous heated cleaning.
6. Cleaning strokes. While pressing the spray
trigger, make one slow forward wet pass and
another one back. Let the built-in heater, formula,
and DirtLifter PowerBrushes do the work for you.
Caution: Do not overwet.
Take care not to run over loose objects or edges
of area rugs. Stalling the brush may result in
premature belt failure.
Note: Your machine is equipped with a
circuit breaker that will automatically shut
off the brush if a large or loose object is
caught in the brush roll. If that happens, be
sure to unplug your machine, remove the
foreign object, and then plug the machine
back in to reset the circuit breaker.
Release the spray trigger and make one slow
forward and backward pass over the same area to
remove any residual dirty water and aid in drying.
Repeat cleaning passes until water being pulled
up appears clean. Continue passes without
pressing the spray trigger until you can’t see any
more water being pulled up. After cleaning, you
may want to turn the Custom Clean dial to rinse to
give your carpeting a final water only rinse. This
will ensure thorough removal of embedded dirt
loosened by the formula. BISSELL Deep Cleaning
Formulas contain an anti-resoiling agent that
helps your carpets repel dirt and keeps them
looking good longer.
WARNING:
To Reduce the Risk of Fire and
Electric Shock due to internal
component damage, use only
BISSELL Deep Cleaning Formulas
intended for use with the deep
cleaner.
Keep plenty of genuine BISSELL Deep
Cleansing Formula and Scotchgard
™
protector cartridges on hand so you can
clean and protect whenever it fits your
schedule. Always use genuine BISSELL
Deep Cleaning Formulas. Non-BISSELL
cleaning formulas may harm the
machine and void the warranty.
3
OR
4
F
L
O
O
R
H
O
S
E
C
L
E
A
N
I
N
G
5
Power Switch Heater Switch
10
www.bissell.com
2 2a
Carpet Cleaning (Continued)
ug310-5880_9200E_406.indd 10ug310-5880_9200E_406.indd 10 6/9/06 4:25:39 PM6/9/06 4:25:39 PM