Filter
Top Products
Some models are equipped with a Scotchgard
protector post-treatment applicator and cartridge.
Using this, along with one of the BISSELL Deep
Cleaning Formulas containing Scotchgard, to help
retain the carpet cleanliness achieved with the
ProHeat 2X machine. For best results, the post
cleaning treatment should be applied while the
carpet is still damp. It is recommended that the
Scotchgard protector be applied every 12 months
to all clean carpeted areas, and after every deep
cleaning for high traffic areas such as entryways
and stairs.
1. Immediately after cleaning and rinsing your carpets,
empty the 2-in-1 water tank and refill the heavy duty
bladder with clean hand hot tap water.
2. Set Ready Tools dial to the hose/attachment setting.
3. Purge the hose to eliminate cleaning formula from the
tube by spraying clean water through the flex hose
(without attachments) into a sink for 15-30 seconds.
4. Attach Scotchgard protector post-treatment
cartridge to the applicator tool, following the
instructions on the cartridge. Attach the combined
tool/cartridge to the flex hose. The water from the
2-in-1 water tank will automatically mix with the
concentrated Scotchgard protector post-treatment
formula contained in the cartridge.
5. Turn the Custom Clean dial to the rinse/protect setting.
6. Before applying Scotchgard protector to a
large area, test in a small, hidden area for
colourfastness. Examine area when dry. If colour
is affected, do not use. For use on upholstery, look
for manufacturer’s cleanability code tag. Use only
on fabrics coded “W” or “WS”. If coded “S” or “X”,
do not use. Not recommended for use on velvet,
silk vinyl, leather, or 100% cotton upholstery.
7. Apply Scotchgard protector in a slow sweeping
motion with a slight overlap of the treated area. For
best coverage, follow the guide on the cartridge.
8. One 8 oz. cartridge protects 200 square feet (18.6
sq. meters). This is equal to two average size rooms,
(each at 10 x 10 ft. or 3 x 3 meters). Periodically check
the level in the bottle to ensure the best coverage.
9. Be careful not to spray the Scotchgard protector
onto furniture or fabric that has not been tested
for colourfastness. If this does occur, wipe off the
Scotchgard protector.
10. When finished remove the cartridge from the
applicator tool. If formula is left, replace the cap to the
cartridge and store at room temperature for later use.
11. With the applicator tool still on the end of the flex
hose, spray clean hand hot tap water into the sink
to avoid any future clogging. Let dry before storing.
12. Store applicator tool in a convenient location for
use the next time.
Post-Treatment Scotchgard Protector* (Optional)
3
13
www.bissell.com
11
7
Tip:
If clogged, soak
applicator tool
in hand hot tap
water before
using.
4
ug310-5880_9200E_406.indd 13ug310-5880_9200E_406.indd 13 6/9/06 4:25:41 PM6/9/06 4:25:41 PM