Filter
Top Products
Your ProHeat 2X model may come with a hard
floor tool and Hard Floor Solutions Formula. If
not, these products are available for purchase
by contacting the BISSELL Consumer Services
department by phone. The hard floor tool
provides effective cleaning for linoleum, vinyl,
and tile floors.
Caution: Do not use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up any loose
debris and pet hair.
2. Move any furniture, if needed.
3. Empty any carpet cleaning formula back into the
BISSELL bottle if stored in the formula tank.
Fill formula tank with BISSELL Hard Floor
Solution Formula.
4. Fill the 2-in-1 water tank with hand hot tap water
and set aside.
5. Attach the hard floor tool onto the bottom of the
machine by hooking it into the nozzle and swinging
it down until it clicks into place.
6. Check Ready Tools dial. It should be set on
floor cleaning.
7. Set the Custom Clean dial to normal clean.
8. Plug in and turn on the power switch and
heater switch.
9. Slowly move the machine forward and back over
bare floor surface one time while depressing
spray trigger.
Caution: Do not overwet.
10. Repeat the motion without pressing the spray
trigger using the hard floor tool to squeegee and
suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry before storing.
13. If any formula remains in the formula tank, pour
it back into the Hard Floor Solutions bottle for use
the next time.
14. Rinse out the formula tank.
Hard Floor Cleaning
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
16
www.bissell.com
5
ug310-5880_9200E_406.indd 16ug310-5880_9200E_406.indd 16 6/9/06 4:25:45 PM6/9/06 4:25:45 PM